Crealev
Levitation
Module/
CLM-1+
DESCRIPTION
The CLM-1+ is a kit that consists of a base (non-floating part) and a carrier (floating magnet ring). The CLM-1+ is an iteration of the CLM-1 system, they are the same except for the levitation height, CLM-1+ has 9 mm of extended levitation height, resulting in a maximum levitation height of 44 mm. The CLM-1+ levitation system is capable of carrying loads up to 1 kg.
CLM-1+ main features:
| • Modular levitation system, suitable for a wide variety of applications |
| • High levitation height |
| • Robust optical sensing system |
| • Excellent stability |
| • Carrier plateau locks-on easily |
| • Power efficient |
| • Ability to carry large loads |
The CLM-1+ is operated by connecting the base to a supply (mains adaptor). Then putting the carrier, with its rubber side down, in the middle above the base until “lock” occurs. Then the carrier can be released. Both carrier and base contain powerful magnets, therefore Crealev advises to keep magnetic sensitive devices such as credit cards at a minimum distance of 25 mm (<300 Gauss) from the CLM-1+.
SIZE AND WEIGHT
Carrier (floating disc):
| Height: | 13 mm | |
| Diameter: | 124 mm | |
| Weight: | 320 gr |
Module (base):
| Height: | 15 mm | |
| Width/Length: | 202 mm | |
| Weight: | 1500 gr |
LEVITATION HEIGHT
| Load | Levitation height | |
|---|---|---|
| 0 gr | 44mm | |
| 500 gr | 24 mm | |
| 1000 gr | 17 mm |
ELECTRICAL REQUIREMENTS
| Connection: | 14 pin flat-cable connector or socket 5 mm / 2.1 mm | ||
| Adaptor (optional) | |||
| Voltage input (AC): | 100-240V | ||
| Voltage output: | 18V | ||
| Current: | 2A peak | ||
| Power consumption (rest position): | <4 W |
SPECIFICATION SHEET (PDF)
