Crealev
Levitation
Module/
CLM-2
DESCRIPTION
The CLM-2 is a kit that consists of a base (non-floating part) and a carrier (floating magnet ring). The CLM-2 is a levitation system with a larger footprint, levitation height of 90 mm and is capable of carrying loads up to 10 kg.
CLM-2 main features:
| • Modular levitation system, suitable for a wide variety of applications |
| • High levitation height |
| • Robust optical sensing system |
| • Excellent stability |
| • Carrier plateau locks-on easily |
| • Power efficient |
| • Ability to carry large loads |
The CLM-2 is operated by connecting the base to a supply (mains adaptors). Next putting the carrier, with its rubber side down, in the middle above the base until “lock” occurs. The carrier can then be released. Both carrier and base contain powerful magnets, therefore Crealev advises to keep magnetic sensitive devices such as credit cards at a minimum distance of 50 mm (<300 Gauss) from the CLM-2.
SIZE AND WEIGHT
Carrier (floating disc):
| Height: | 26 mm* | |
| Diameter: | 248 mm* | |
| Weight: | 2 kg* |
Module (base):
| Height: | 30 mm* | |
| Width/Length: | 404.4 mm* | |
| Weight: | 6 kg* |
LEVITATION HEIGHT
| Load | Levitation height | |
|---|---|---|
| 0 kg | 90 mm* | |
| 5 kg | 48 mm* | |
| 10 kg | 25 mm* |
ELECTRICAL REQUIREMENTS
| Adaptor | ||
| Voltage input (AC): | 100-240V* | |
| Voltage output: | +/- 18V* | |
| Current: | 5A peak* | |
| Power consumption (rest position): | <10 W* |
SPECIFICATION SHEET (PDF)
Direct Sales
For designers, artist and small companies it is possible to order Crealev’s levitation modules in low quantities. If you are interested, please let us know by using our contact information or by filling out our contact form.